YOU WILL NEED:
• sticks ‘n stonestm crystal design(s)
• Garment or other flat, fabric surface you choose
(For best results, launder garment before you begin.)
• Thin piece of cotton cloth (protects your fabric)
• Iron (set to “cotton”)
1. Place a piece of flat plain white paper inside of your garment.
2. Carefully remove the white backing paper from design (you will not use this again).
3. Place design with sticky side down on fabric into desired position. The clear adhesive will hold it in place. (You may reposition if desired.)
4. Place a thin piece of cotton cloth over the top of the design (i.e. hankerchief). |
|
 |
| 5. With your iron set to the proper temperature, FIRMLY PRESS DOWN IRON (DO NOT MOVE BACK AND FORTH) for 30 seconds. (Heavier fabrics like denim may require more time; light fabrics like silk require less time.)
6. Allow transfer design to cool for approximately 2 minutes. Carefully pull the clear plastic film away from the garment. (If any crystals lift with the paper, replace paper and cotton cloth and press that area once again.)
When properly applied, designs are machine washable and dryable and can be dry cleaned. Be sure to turn your garment inside out before washing. |
|
